Associate Engineer - Process Engineering at Cyient DLM, Hyderabad

Open. Posted .

Parylene CVD and conformal coating for PCB assemblies, with machine setup, curing, inspection, and production support in an EMS environment. The role is in Hyderabad.

Apply on Cyient DLM's site for Associate Engineer - Process Engineering

Applying opens the employer's page. Want jobs like this sent to you each morning? Open Elip.

Key facts
LocationHyderabad, Telangana
Work modeOn-site
Experience3–8 years
PayNot stated by the employer
RoleManufacturing Engineer
Skills asked forParylene coating equipment operation, Parylene coating process parameters, Conformal coating, Acrylic, Silicone, Urethane, Nordson, ASYMTEK
Posted3 Nov 2026

Elip's summary

Works as a process technician in electronics manufacturing services. Operates Parylene CVD and conformal coating processes for PCB assemblies, using Parylene coating process parameters and selective coating machines. Applies IPC-CC-830 and ESD practices to inspect coated assemblies and control defects.

The job, in the employer's words

Process Technician (Parylene & Conformal Coating)

​

Experience: 3–8 Years

Qualification: Diploma / ITI / B.E. / B.Tech in Electronics, Electrical, Mechanical or relevant engineering discipline

Work Location:  Hyderabad

  • Job Summary

We are looking for a skilled and hands-on Process Technician with experience in Parylene coating and conformal coating processes within an Electronics Manufacturing Services (EMS) environment.

The candidate will be responsible for operating, setting up, monitoring, and maintaining Parylene CVD coating equipment and conformal coating machines to ensure consistent coating quality and production output.

The role involves machine setup, recipe selection, parameter setting, equipment operation, process monitoring, basic troubleshooting, defect identification, and production support while ensuring compliance with quality standards, safety requirements, and established work instructions.

  • Key Responsibilities

A. Parylene Coating Process Operation

Operate and monitor Parylene coating equipment based on approved process specifications and work instructions.

Perform machine loading and unloading, chamber cleaning, and preparation of PCB assemblies for coating.

Set and monitor process parameters such as:

Vacuum level.

Pyrolysis temperature.

Deposition temperature.

Deposition time and rate.

Coating thickness.

Handle Parylene precursor material and consumables as per safety procedures.

Monitor coating cycle conditions and ensure consistent process execution.

Perform routine chamber cleaning and maintenance activities.

Check coating thickness and uniformity using approved measurement methods.

Identify and report coating defects such as poor adhesion, uneven coating, contamination, pinholes, and incomplete coverage.

Maintain equipment and process records for every production batch.

B. Conformal Coating Process Operation

Operate manual and selective conformal coating systems.

Handle coating materials such as:

Acrylic.

Silicone.

Urethane.

Perform coating preparation, material loading, mixing (where applicable), and viscosity checks as per specifications.

Operate and monitor selective coating machines such as Nordson / ASYMTEK or equivalent systems.

Select approved machine programs and recipes based on product requirements.

Perform basic program adjustments under engineering guidance.

Ensure correct coating coverage, thickness, and selective application areas.

Monitor coating defects such as:

Bubbling.

Delamination.

Bridging / webbing.

Poor coverage.

Excessive coating.

Contamination.

Maintain proper masking, fixturing, and PCB handling practices.

C. Curing & Post-Coating Operations

Operate curing ovens and UV curing systems as per approved process parameters.

Monitor curing temperature, time, and other applicable process settings.

Ensure proper loading and unloading of PCB assemblies.

Verify coating condition after curing.

Perform visual inspection of coated assemblies and identify abnormalities.

Ensure proper handling and storage of coated PCB assemblies.

D. Machine Setup & Maintenance

Perform daily machine startup and shutdown activities.

Carry out equipment setup, cleaning, and routine maintenance.

Check dispensing nozzles, spray heads, valves, filters, and material delivery systems.

Monitor equipment alarms and report abnormalities.

Support preventive maintenance and calibration activities.

Maintain machine cleanliness and ensure equipment readiness for production.

Coordinate with Maintenance and Engineering teams for equipment breakdowns and technical issues.

E. Quality Control & Defect Identification

Perform visual inspection of coated PCB assemblies as per approved inspection criteria.

Verify coating coverage, thickness, uniformity, and curing quality.

Identify and segregate defective products.

Follow applicable IPC-CC-830 and customer-specific coating requirements.

Ensure compliance with ESD, cleanroom, and contamination-control practices.

Support Quality teams during inspections, audits, and process investigations.

Maintain product traceability and inspection records.

F. Production Support & Process Control

Execute daily production plans as per approved schedules.

Ensure correct material, machine program, and process parameters are used for each product.

Monitor process performance and report deviations to the Process Engineer / Supervisor.

Minimize material wastage and equipment downtime.

Follow FIFO and material shelf-life requirements.

Support engineering trials, sample builds, and new product introduction activities.

Coordinate with Production, Quality, and Maintenance teams for smooth operations.

G. Documentation & Safety

Maintain production records, machine logs, batch records, and material consumption records.

Follow SOPs, work instructions, and process control sheets.

Record process parameters and deviations accurately.

Follow chemical handling, PPE, ventilation, and EHS requirements.

Ensure safe handling and disposal of coating chemicals and consumables.

Maintain workplace cleanliness and follow 5S practices.

  • Required Technical Skills & Competencies

Technical Skills:

Hands-on experience in Parylene coating equipment operation (CVD process).

Knowledge of Parylene coating process parameters and equipment operation.

Experience in manual or selective conformal coating processes.

Basic knowledge of Acrylic, Silicone, and Urethane coating materials.

Experience operating selective coating machines (Nordson / ASYMTEK or equivalent).

Knowledge of curing ovens and UV curing systems.

Understanding of PCB assembly and handling procedures.

Ability to identify common coating defects and process abnormalities.

Basic knowledge of coating thickness measurement and visual inspection.

Understanding of ESD, cleanroom, and chemical safety practices.

Basic computer skills for machine operation and production documentation.

  • Educational Qualification & Experience

Diploma / ITI / B.E. / B.Tech in Electronics, Electrical, Mechanical, or relevant engineering discipline.

3–8 years of experience in EMS / PCB assembly manufacturing.

Hands-on experience in Parylene coating and/or conformal coating operations.

Experience with automated coating equipment will be preferred.

Candidates with practical experience in Parylene CVD equipment operation will receive preference.

About Cyient DLM

founded in 1990.

People in Elip's index who work here
608
Typical time at Cyient DLM
16 months
Typical career length so far
4.2 years

Largest teams

  • Engineering133 people
  • Operations113 people
  • Quality Assurance59 people
  • Leadership43 people

Where people here worked before

  • Kaynes Technology India Limited12 people

Totals from public professional profiles in Elip's index; any group under ten people is left out.

All open jobs at Cyient DLM

Similar open jobs

More jobs in Hyderabad or all jobs on Elip

About this page

Elip lists jobs that employers publish on their own careers sites, never copies from job boards. This one comes from Cyient DLM's listing on Zoho, posted 3 Nov 2026. The summary is Elip's; the description is the employer's. When the job closes, this page says so.