Locomotion & Controls Engineer at PeoplePlus (innefu.zohorecruit.in), Delhi
Open. Posted .
Legged-robot gait control takes locomotion from rough-terrain simulation to real hardware, with field tests, sensor-based state estimation and actuator selection. The role is in Delhi.
Applying opens the employer's page. Want jobs like this sent to you each morning? Open Elip.
| Location | Delhi, Delhi |
|---|---|
| Work mode | On-site |
| Experience | 3–8 years |
| Pay | Not stated by the employer |
| Role | Mechanical Design Engineer |
| Skills asked for | C++, Python, Rigid-body dynamics, Model predictive control (MPC), Whole-body control, Reinforcement learning, Proximal Policy Optimization (PPO), Isaac Sim |
| Posted | 27 Oct 2026 |
Elip's summary
Locomotion and controls engineer for an AI-driven R&D organisation building advanced data analytics and information security solutions. Designs and trains legged-robot gait controllers using rigid-body dynamics and control theory, reinforcement learning, and physics simulation, then transfers them from simulation to real hardware. Applies C++ and Python to robot state estimation and terrain-aware locomotion.
The job, in the employer's words
JD Locomotion &
Controls Engineer
About
Innefu Labs
Founded in 2010, Innefu Labs is an
AI-driven R&D organisation focused on advanced Data Analytics and
Information Security solutions. With a strong emphasis on innovation and
product engineering, the company develops globally competitive solutions addressing
complex challenges in national security, cyber intelligence, and data
analytics.
With 100+ successful deployments across the
Indian Subcontinent, the Middle East, and Southeast Asia, Innefu has
established a strong presence in AI for National and Cyber Security. Its
proprietary products serve Defence and Intelligence agencies, Law Enforcement
organisations, Financial Intelligence Units, BFSI institutions, and Fortune 500
companies.
Innefu specialises in building secure,
high-performance products for sensitive and mission-critical environments, with
a strong focus on innovation, reliability, scalability, and customer
satisfaction
Role
Overview: Makes the robot walk, climb and recover
on mud, rock, snow and stairs — designing and training the gait controller in
simulation and transferring it to the real robot.
Experience: 3–8 years,
Education: MTech/PhD
with a thesis on legged locomotion. BTech/MTech/PhD in Mechanical, Electrical,
Aerospace, Robotics or Control Systems. Very few people in India have built
legged robots, so a strong humanoid, exoskeleton or legged-research background
also counts.
Responsibilities
- Build the simulation
environment with randomised rough terrain.
- Develop gaits (walk, trot,
stairs, crawl) using reinforcement learning, model predictive control (MPC), or
both.
- Transfer controllers from
simulation to the real robot (sim-to-real) and tune them in field tests.
- Write state estimation (body
pose and velocity) from IMU and joint sensors.
- Specify actuator and leg
requirements to choose the off-the-shelf supplier.
Must
have
- C++ and Python.
- Rigid-body dynamics and control
theory: MPC, whole-body control, or RL for locomotion (PPO).
- At least one physics simulator:
Isaac Sim / Isaac Lab, MuJoCo, PyBullet, Gazebo or RaiSim.
- Has run a controller on real
robot hardware, not only in simulation.
Good
to have
- Hands-on with commercial
quadrupeds (Unitree, ANYmal, Spot, Deep Robotics) or their SDKs.
- Open-source legged stacks:
legged_gym, OCS2, Pinocchio, Drake, Crocoddyl.
- Publications at ICRA, IROS,
CoRL, RSS or Humanoids.
- Kalman filters / state
estimation; terrain-aware foothold planning.
- PyTorch, GPU training, domain
randomisation.
Requirements
Responsibilities
- Build the simulation
environment with randomised rough terrain.
- Develop gaits (walk, trot,
stairs, crawl) using reinforcement learning, model predictive control (MPC), or
both.
- Transfer controllers from
simulation to the real robot (sim-to-real) and tune them in field tests.
- Write state estimation (body
pose and velocity) from IMU and joint sensors.
- Specify actuator and leg
requirements to choose the off-the-shelf supplier.
Must
have
- C++ and Python.
- Rigid-body dynamics and control
theory: MPC, whole-body control, or RL for locomotion (PPO).
- At least one physics simulator:
Isaac Sim / Isaac Lab, MuJoCo, PyBullet, Gazebo or RaiSim.
- Has run a controller on real
robot hardware, not only in simulation.
Good
to have
- Hands-on with commercial
quadrupeds (Unitree, ANYmal, Spot, Deep Robotics) or their SDKs.
- Open-source legged stacks:
legged_gym, OCS2, Pinocchio, Drake, Crocoddyl.
- Publications at ICRA, IROS,
CoRL, RSS or Humanoids.
- Kalman filters / state
estimation; terrain-aware foothold planning.
- PyTorch, GPU training, domain
randomisation.
About PeoplePlus (innefu.zohorecruit.in)
Headquartered in Delhi, founded in 2010.
- People in Elip's index who work here
- 334
- Typical time at PeoplePlus (innefu.zohorecruit.in)
- 20 months
- Typical career length so far
- 4.8 years
Largest teams
- Information Technology79 people
- Engineering71 people
- Consulting36 people
- Research19 people
Totals from public professional profiles in Elip's index; any group under ten people is left out.
Similar open jobs
About this page
Elip lists jobs that employers publish on their own careers sites, never copies from job boards. This one comes from PeoplePlus (innefu.zohorecruit.in)'s listing on Zoho, posted 27 Oct 2026. The summary is Elip's; the description is the employer's. When the job closes, this page says so.