Propulsion Systems Engineer, Engine Cycle & Fluid Systems at astpl, Bengaluru
Open. Posted .
Liquid rocket engine cycle and fluid-system design for a two-stage orbital launch vehicle, covering engine models, test-data correlation and cycle trades. Bengaluru role with ₹24–36 LPA fixed CTC, variable pay and ESOPs.
Applying opens the employer's page. Want jobs like this sent to you each morning? Open Elip.
| Location | Bengaluru, Karnataka |
|---|---|
| Work mode | On-site |
| Experience | 5–6 years |
| Pay | ₹24,00,000 – ₹36,00,000 a year |
| Role | Mechanical Design Engineer |
| Skills asked for | Liquid rocket engine system analysis, Propulsion fluid-system design, Pump-fed engine cycle modeling, Turbopump power matching, Pump and turbine maps, Real-fluid behavior of LOX and methane, NPSS, ROCETS |
| Posted | 23 Oct 2026 |
Elip's summary
Builds propulsion systems for an early-stage company developing a two-stage orbital launch vehicle. Models liquid rocket engine cycles and fluid systems, matching turbopump power and analyzing LOX and methane behavior using NPSS and NASA CEA. Applies Python and NASA-STD-7009B to correlate models with test data.
The job, in the employer's words
ABOUT ASTROBASE SPACE TECHNOLOGIES
Astrobase Space Technologies is an early-stage Bengaluru company building a two-stage orbital launch vehicle. Our engine is a LOX–methane full-flow staged-combustion engine. The Astrobase Propulsion team is looking for experienced and passionate professionals who can own the vehicle's stage fluid and propulsion systems from design to flight.
KEY RESPONSIBILITIES
- Own the engine P&ID: propellant, cooling, purge, pressurisation, ignition, bleed and instrumentation circuits, with valve functions and failure states.
- Build and maintain the steady-state power balance of the fuel-rich and oxidiser-rich preburner–turbopump loops; close the pressure schedule and allocate pressure drop to each component.
- Map the operating envelope: throttle range, mixture-ratio excursions, pump inlet NPSP margins, and stage-interface pressures and temperatures.
- Model start, shutdown, chill-down, priming and waterhammer transients; set valve timing and sequence constraints with the controls team.
- Run sensitivity and Monte Carlo studies on component scatter and engine-to-engine variation; size calibration and trim orifices.
- Write requirement specifications for pumps, turbines, preburners, valves, lines and heat exchangers, and the engine-to-stage and engine-to-stand ICDs.
- Issue pre-test predictions and redlines; correlate the model with water, LN2 and hot-fire data and keep a model-validity record.
- Run cycle trades for each engine iteration and record each decision with the analysis behind it.
DESIRED QUALIFICATION
- B.E./B.Tech/M.E./M.Tech in Mechanical or Aerospace Engineering.
- Min. 5+ years in liquid rocket engine system analysis or propulsion fluid-system design.
- Has built a pump-fed engine cycle model (gas-generator, staged-combustion, expander or electric-pump) and correlated it with test data.
- Turbopump power matching, pump and turbine maps, and real-fluid behaviour of LOX and methane near saturation.
- Cycle and fluid-network tools: NPSS, ROCETS, EcosimPro/ESPSS or GFSSP; NASA CEA.
- Python or MATLAB for analysis and test-data reduction.
PREFERRED QUALIFICATION
- Transient start and shutdown models on hardware that was later fired.
- Staged-combustion experience, especially oxidiser-rich preburner circuits.
- Cryogenic line chill-down, two-phase flow and geysering analysis.
- Model verification and credibility practice per NASA-STD-7009B (Standard for Models and Simulations); NASA SP-125 design methods.
- Has set test objectives and instrumentation for a component or engine test.
WHAT WE OFFER
- Salary: ₹24–36 LPA fixed CTC, variable pay based on experience and role fitment.
- Attractive early-stage stock options (ESOPs).
- Group health insurance: employee, spouse, children and parents.
- Insurance: term-life and personal-accident cover.
- Work environment: Challenging, stimulating, research-driven work solving rocket problems every day with a great team. We have a good time, and unlimited coffee.
WHY WORK WITH US?
At Astrobase, we believe in the power of human ingenuity and collaboration to push the boundaries of space exploration. As a team member, you’ll be:
- Creating History: Join us in developing cutting-edge launch vehicles, playing a pivotal role in transforming space access and shaping the future of space exploration.
- Collaborating with Experts: Work alongside ISRO scientists and industry veterans with decades of experience in designing India’s iconic space missions like Chandrayaan 3
- Growth Opportunities: As Astrobase scales, you’ll have the chance to take on leadership roles and be part of an expanding organization driving change in the Indian space sector.
- Pioneering Space Technology: Your contributions will not only impact Astrobase but also influence the global space ecosystem. Be part of something larger than yourself.
Astrobase is an equal-opportunity employer; we hire on skills, merit and experience. Apply with your CV and a short note on combustion hardware you have designed, built or tested.
About astpl
Headquartered in Bengaluru, founded in 2024.
- People in Elip's index who work here
- 33
- Typical time at astpl
- 17 months
- Typical career length so far
- 8.0 years
Largest teams
- Engineering10 people
Totals from public professional profiles in Elip's index; any group under ten people is left out.
Similar open jobs
About this page
Elip lists jobs that employers publish on their own careers sites, never copies from job boards. This one comes from astpl's listing on Keka, posted 23 Oct 2026. The summary is Elip's; the description is the employer's. When the job closes, this page says so.